Victron Smart BatteryProtect 100A 12V/24V battery over discharge protector SBP-100 (Bluetooth inbuilt)

Victron Smart BatteryProtect 100A 12V/24V battery over discharge protector SBP-100 (Bluetooth inbuilt) This Victron 100A 12/24V automatic smart battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Smart?ÿBatteryProtect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the Smart?ÿBattery Protect disconnects the loads to protect them from damage. Bluetooth connectivity: connect your smartphone for easy programming of the voltage settings. Automatic system recognition: the Smart BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the Smart BatteryProtect remotely,?ÿmanually turn loads on and off,?ÿand use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. Click on the Details and specifications tab for more information about this product. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 100A Peak current (30 seconds): 600A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40?øC to +40?øC (up to 60% capacity at 50?øC) Dimensions: Dimensions:?ÿ59 x 42 x 115 mm Weight: 500g M8 terminals Additional items: Negative cable: 50cm length, 1.5mm 2 cross section 2 pin dry-contact socket for remote switch 3 pin dry-contact socket for negative cable, alarm and programming input This product is covered by a ?ÿ5 year manufacturer warranty .?ÿ Click on the Installation tab for further instructions. This unit comes with a detailed user manual which explains connection and operations. A technical drawing of the product dimensions is also?ÿavailable to download in the 'Documents' tab. Please note: The?ÿSmart Battery Protect should be connected on the positive battery wire, close to the battery. This product is suitable for one-directional current flow only. Do not install in between battery and battery charger except for in specialised systems. See manual for further details. The following videos provide a brief overview of how to use the BatteryProtect and how to program the settings: If you need help with installation or have any technical questions we can provide FREE?ÿsupport - please contact us by email or phone. The following documents are available to download: User manual for Victron Smart Battery Protect 100A 12/24V (VE-SBPR100) Datasheet for Victron Smart Battery Protect 100A 12/24V (VE-SBPR100)