50W solar panel:

This high-efficiency, waterproof 50W 12V monocrystalline solar panel is designed for permanent outdoor use. It provides free electricity for charging 12V batteries to power various applications, such as in a camper van, motorhome, boat, shed, farm, as well as remote applications like telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage/current (e.g. electric motors or pumps). The panel is equipped with 5m of special solar cable, which can work at high roof temperatures with minimum power losses. A pair of male/female MC4 connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads, or to your existing system. The MC4 connectors can also be removed when wiring to the screw terminals of a solar charge controller. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed aluminum frame will provide consistent, free power for years. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3, or 4 busbar solar cells used in most other solar panels. They are able to extract more power from the same surface area, resulting in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.

10A solar charge controller:

The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries while charging them, with automatic cut-off to prevent overcharging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology, which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity. This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as overcharge/discharge, overload, short circuit, overheating, etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm. This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery)/320W (24V battery) of solar power input, making it a perfect choice for small or medium solar PV systems with a battery and load, such as in a campervan or boat.

The solar charge controller is equipped with advanced communication technology, allowing users to monitor and program parameters through various methods:

1) Connect the controller to a remote meter MT50 with an LCD screen. This display shows system performance information and allows manual adjustment of parameters and load settings.

2) Connect the controller to a Wi-Fi module to create a Wi-Fi network for monitoring or adjusting charging parameters and controller settings using the free mobile app "Solar Station Monitor," available for Android and iOS users.

3) Use an RJ45 to USB cable to connect the controller directly to your PC or laptop to monitor and adjust parameters and settings with the free computer program "Solar Station Monitor" (compatible with Windows-based PCs and laptops).

By using one of these communication methods, users can access various charging parameters such as voltage, current (separately for solar panel/load), battery state of charge, accumulated charge, discharge energy, min/max voltage, and other information. Additionally, users can amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type, personalize load settings, and more.

In addition to the built-in temperature sensor, the controller has terminals for connecting a remote temperature sensor, allowing for precise battery temperature measurement and optimization of the charging process.

Please note that this is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately. For more information about this product, refer to the "Details and Specifications" tab.

Solar panel specifications:

- Peak power: 50W

- Maximum power voltage: 20.2V

- Maximum power current: 2.48A

- Open circuit voltage: 23.9V

- Short circuit current: 2.63A

- Power allowance range: +/- 3%

- Dimensions: 590*505*25mm

- Weight: 4.2 kg

- 4 mounting holes: 9 x 11 mm

- 2 x 5m of high-quality single-core solar cable (2.5mm cross-section)

- Male and female MC4 connectors attached

Please make a note of the following details:

Charge controller specifications:

- Rated current: 10A

- Fully automated operation and auto 12/24V selection

- Wide solar input voltage range up to 50V

- 3 pairs of terminals (input, battery, output)

- LEDs to indicate charging, battery, and load

- Temperature sensor for automatic compensation (-3mV/°C/2V)

- Overload protection (1.05 times the rated discharge current)

- Short circuit protection (2 times the rated discharge current)

- Overcharge/discharge, overheating, and other protection features

- Self-consumption: 8.4mA (12V) / 7.8mA (24V)

- Working temperature: -35°C to +50C

- Terminals for wire up to 4mm²

- Size: 13.8 x 6.9 x 3.7 cm

- Weight: 130g

- Multiple mounting holes for ease of installation

Please note: Due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package. This product is covered by a 1-year warranty provided by Photonic Universe (including a 1-year warranty for the solar charge controller and a 1-year workmanship warranty for the solar panel). We will repair or replace defective items at our discretion. In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.

Installation:

Electrical connection: The solar charge controller included in this kit is supplied with a detailed user manual that contains a wiring diagram and explanation of installation/operations. Please ensure that you read the full user manual before starting the installation.

Fitting: The solar panel in this kit can be fitted to a flat roof using metal brackets, plastic brackets, or a variety of other methods. To view our full range of brackets, please visit the mounting accessories category of our online shop. The solar charge controller in this kit is not waterproof and should be mounted indoors.

If you need help with installation or have any technical questions, we can provide FREE support - please contact us by email or phone.

50W 12V solar charging kit with 10A controller and 5m cable