VICTRON PHOENIX INVERTER 12/1200 230V WITH VE.DIRECT PORT

This Victron 1200VA 12V Phoenix Inverter is designed to convert DC power to AC power with maximum safety and efficiency. The device comes with advanced configurable protection functions to ensure safe usage. The inverter features a built-in VE.Direct port that allows remote programming and system monitoring via various communication methods. The key features of this Victron 12/1200 Phoenix inverter are: - High Peak Power Handling: The inverter can handle a peak power of 2200W, which makes it suitable for powering loads with a high initial start-up power. - Superior Build Quality: The inverter features a toroidal transformer that works at higher efficiency and cooler operating temperature compared to standard transformers. - Inbuilt Safety Protection: The unit is equipped with essential safety features, including short-circuit, overload, battery overvoltage, and overheating protection. - Advanced Monitoring and Programming Abilities: The VE.direct port of the inverter enables connection to a PC/Laptop to access the free VictronConnect software. Alternatively, an additional VE.Direct Bluetooth dongle (sold separately) may be connected to wirelessly connect a smartphone/tablet to the inverter via the VictronConnect app. Using either of these connection methods will unlock the ability to monitor the system remotely and access important system data such as Voltage (battery and AC output), a load indicator, and alarms. The user can also remotely program the system, for example, specifying the low-battery cut-off level (and level for reconnection), the output voltage and frequency (50/60Hz), settings for the power-saving ECO mode, and even the ignition control of the vehicle to switch the unit On/Off. - Power-Saving ECO Mode: The inverter switches into standby mode when the load power falls below a pre-set value. It will switch on every 2.5 seconds (adjustable) to check whether the load power has returned to a sufficient level. - Dynamic Cut-Off Feature: The inverter intelligently determines the DC disconnect voltage by monitoring the rate of discharge from the battery (connection to VictronConnect app/software required). - Remote On/Off Power Function: The inverter features a connection point for an optional remote On/Off switch (not included). - AC Power Transfer: The inverter can be connected to an optional automatic transfer switch (not included) to transfer the load to another AC power source. - LED Indicators: The inverter comes with red/green LEDs that show the inverter operation and the status of various protection features. The inverter comes with a UK 3-pin plug socket. Specifications: Input DC voltage range: 9.2V - 17V Output AC voltage range: 230V Output AC frequency: 50Hz / 60Hz (programmable with app) Continuous power at 25°C: 1200VA / 1000W Continuous power at 40°C: 850W Peak power: 2200W Zero-load power: 7W Default zero-load power in ECO mode: 1W (Default retry interval = 2.5s, adjustable) Output wave: pure sine wave Battery type: Sealed lead acid, Gel, AGM AC socket: UK (BS 1363) Minimum battery capacity: 150Ah Nominal inverter efficiency: 91% Low battery shutdown: 9.3V (programmable with app) Operating temperature range: -40°C to +65°C (fan assisted cooling) Maximum cable cross section: 35mm² Humidity (non-condensing): max. 95% Size: 117 x 232 x 362 mm Weight: 7.4kg This product is covered by a 5 year manufacturer warranty . The following documents are available to download: User manual for Victron Phoenix Inverter 12/1200 230V with VE.Direct port (VPX1200-12) Datasheet for Victron Phoenix Inverter 12/1200 230V with VE.Direct port (VPX1200-12) Technical drawing for Victron Phoenix Inverter 12/1200 230V with VE.Direct port (VPX1200-12)